Joint for plaits and strands

To reduce waste, the ideal solution for the recovery of long crop ends of strand is undoubtedly the coupler for plaits and strands.
It consists of 2 clamps, whose diameter may vary, connected by a nipple.
They are made from high quality steel and processed through severe heat treatment, which ensure many reuses and long life.

COUPLERS SERVICING

• Disassemble the clamp and soak all parts in heavy oil bath for 24 hours;
• Then clean all components with compressed air;
• Check the conditions of the knurl edge, replace wedges if necessary;
• Re-assemble the wedge sets with the elastic ring;
• Sprinkle graphite powder over wedges;
• Check wedges and socket for equal taper.