The main body is one-block in high-quality cast steel, reinforced in the points where the stress is higher, without any welded plate. The cutting blades, made in special hardened steel, are designed to cut both small and big diamater iron. Gears are in wear-resistant steel, continously lubricated, and the moving parts are in hardened and rectified steel.
C 30 THREE-PHASE
| GENERAL FEATURES | |
|---|---|
| RPM per 1' | 110 |
| Power Kw | 2,2 |
| Weight Kg | 236 |
| CUTTING CAPACITY | |||||
|---|---|---|---|---|---|
| Bar | No.bars | No.bars | No.bars | No.bars | No.bars |
| 1 | 2 | 3 | 4 | 5 | |
| Res.650N/mm² | Ø max 26 | Ø max 20 | Ø max 16 | Ø max 12 | Ø max 10 |
| Res.850N/mm² | Ø max 22 | Ø max 16 | Ø max 14 | Ø max 12 | Ø max 10 |
C 30 MONOPHASE
| GENERAL FEATURES | |
|---|---|
| RPM per 1' | 110 |
| Power Kw | 1,5 |
| Weight Kg | 236 |
| CUTTING CAPACITY | |||||
|---|---|---|---|---|---|
| Bar | No.bars | No.bars | No.bars | No.bars | No.bars |
| 1 | 2 | 3 | 4 | 5 | |
| Res.650N/mm² | Ø max 24 | Ø max 16 | Ø max 14 | Ø max 12 | Ø max 10 |
| Res.850N/mm² | Ø max 22 | Ø max 14 | Ø max 12 | Ø max 10 | Ø max 10 |
Loop Dijital